ltft HELP please
04-06-2005, 03:47 PM
#1
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: Cary Il
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
ltft HELP please I am running a stroker motor with 236/236 595/595 112 cam on a A4. My LTFT b1 in park and N reads 9 and ltft b2 reads 0. I put it in gear and LTFT b1 reads 0 and LTFtb2 goes to -5. I have checked the exhaust, air tubes, intake, vac lines, o2s and i cant find anything. What else could cause this?
Last edited by Taphee6; 04-08-2005 at 12:44 PM.
04-08-2005, 10:02 AM
#4
Originally Posted by Taphee6
I am running a stroker motor with 236/236 595/595 112 cam on a A4. My LTFT b1 in park and N reads 9 and ltft b2 reads 0. I put the gear and LTFT b1 reads 0 and LTFtb2 goes to -5.
If it means you put it in gear and the LTFT changed, that's pretty normal behavior...in gear drops to a different BLM cell on every LS1 app I've seen thus far. Different BLM cell, different LTFTs.
Have you driven it thru a complete learn cycle yet? Around 1 hour, varied driving conditions if I recall right gets you a complete learn cycle, maybe do a search on it for details?
04-08-2005, 03:55 PM
#6
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: Cary Il
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Not running good Well took it out for a nice ride and it is not running good. Car is bucking hard when slowing down to a stop and bogs when I punch it. No codes but just not right...
