hc_performance

iTrader: (4)

Finally got a chance to take her to the track last night and went 11.17 @127.2 with a 1.87 60ft with a 150 nx shot. I know with some mt drag radials she will prob. go in the 10's. Needless to say I was very pleased.

shortdog

iTrader: (1)

Very nice times. What are your mods and what tires were you using?

hc_performance

iTrader: (4)

ms3 cam only and a ssf 3500 converter and nx 150 shot. Don't laugh but I was running on 5 year old dry rotted mt et streets mounted on 1982 corvette 15" wheels.

shortdog

iTrader: (1)

Nothing to laugh at. It worked didn't it?

hc_performance

iTrader: (4)

Well when they got done spinning they worked just fine...LOL

Here is a timeslip...

02SOMWS6

iTrader: (6)

What did you run NA? I'm trying to figure were I'm gonna be at when I spray. I run between 11.5- 11.3 NA @119-121 mph with 60ft's between 1.62- 1.57
I have a TNT kit ,I'm gonna start out with a 75 shot and work my way up to a 150 shot

blkZ28spt

Do you have any dyno numbers? Did you do any NA runs? I'm curious because I have the MS3 and SSF3500 combo. On a '98 that's missing a few bolt-ons, but still ran 12.2. Your 60' should definately be lower. I went 1.72 before the cam and 1.74 after. (couldn't stick perfectly though) You should be knocking on the door for some 10's with traction and a good run.

hc_performance

iTrader: (4)

Yes I mad 383 rwhp and 412 rwtq unlocked tuned by me. I ran once n/a but let out at the end and went 11.9 @113 with a 1.85 60'. She should go 11.5 with better tires.

hc_performance

iTrader: (4)

You should be mid to low 10's with a 150 tnt shot because that will be more like 175 to 180 at the wheels!!!