Nitrous Oxide - wired right

http://img.photobucket.com/albums/v213/gvgator5/nitrous3.bmp http://img.photobucket.com/albums/v213/gvgator5/nitrous4.bmp


Is this wired up right and what does the white wire from the window switch go to, I am confussed on how the window switch can shut down the kit???


Also. The leds I have wired into the kit I want to know if this will work the way I have it shown, when I flip the activation switch i want the yellow led to come on then when the wot switch is activated spraying the noids I want the red(should be green messed up in paint to lazy to fix) led to turn on :confused:

the white wire from the window switch should go to your coil...for your RPM!!

on my car it was the white wire to the coil, i belive the neg side of the coil..

wait is this right, ok the red goes to power black ground. green tach(im gonna tap in at computer) white wire goes to white wire on relay(the white wire on the relay is the ground) is this right

no check out this drawing!

these it what i did...

http://www.ls1tech.com/forums/attachment.php?attachmentid=28464

Ok on the harlen switch there is no yellow wire and the green wire goes to the tach. The white wire on my relay is the ground??? and Im not using a fpss :confused:

hmm......youd have to talk to nitrodave or nxricky