TD tail pipes and/or muffler swap to Magnaflows?
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: bridgwater, nj
Posts: 1,527
Likes: 0
Received 0 Likes
on
0 Posts
TD tail pipes and/or muffler swap to Magnaflows?
I think my setup is too quiet. My current setup is nice, especially with the cam and I don't have any drone but I would like something a little louder.
Don't know if tailpipes would be the solution to what I want but I think I may need to swap the mufflers as well. Would tailpipes change the sound that much?
Also, thinking about changing out my edlebrocks to something else, maybe the Magnaflow 4x9s? I know they are straight through and a full 3" ID. I believe my edlebrocks neck down to 2.5" inside. Same readson I ruled out the sweet thunders because they only have a 2.5" core, regardless of a 3" outside.
How's the drone with the magnaflows? I was also considering the magnpacks but I think they might drive me crazy with drone.
Don't know if tailpipes would be the solution to what I want but I think I may need to swap the mufflers as well. Would tailpipes change the sound that much?
Also, thinking about changing out my edlebrocks to something else, maybe the Magnaflow 4x9s? I know they are straight through and a full 3" ID. I believe my edlebrocks neck down to 2.5" inside. Same readson I ruled out the sweet thunders because they only have a 2.5" core, regardless of a 3" outside.
How's the drone with the magnaflows? I was also considering the magnpacks but I think they might drive me crazy with drone.
#2
Launching!
iTrader: (3)
Join Date: Nov 2004
Location: Fairmont, WV
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
I have the magnaflows 4" round body mufflers and there is no drone. I have them over the axle. If you think your dumps are quiet these will probably be to quiet also. I have some pics at my webpage in my sig.
#4
Launching!
iTrader: (3)
Join Date: Nov 2004
Location: Fairmont, WV
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
The tone is extremely deep. There is no drone or interior resonance. At idle it is deep and tame. At part throttle there is a nice powerful tone. At WOT it is look at me loud. But for me at no time is it to loud. I think in comparison to the bullets these would be slightly tamer but I could be wrong. The 4x9's would probably be a step quieter than the 4" round body mufflers.
#5
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: bridgwater, nj
Posts: 1,527
Likes: 0
Received 0 Likes
on
0 Posts
The proble I have is that I have a full 3" exhaust and believe the Edlebrocks neck down to 2.5".
First and foremost, it has to be stainless. Right now I am considering the Magnapacks or Magnflow 4x9s. I saw that Stainless Works has a 3" round bullet (in Jegs) but fear it may be a 2.5" core. Does anyone know?
WHat does anyone think about waiting for the QTP stainless cutout and added them to my scheme?
First and foremost, it has to be stainless. Right now I am considering the Magnapacks or Magnflow 4x9s. I saw that Stainless Works has a 3" round bullet (in Jegs) but fear it may be a 2.5" core. Does anyone know?
WHat does anyone think about waiting for the QTP stainless cutout and added them to my scheme?