WS6FirebirdTA00

iTrader: (33)

i have mine set at 800, sounds great and idles great, idle recovers from letting off the gas and all too with no problems. i know a lot of guys are at 900, noone goes much lower than 800 do they?

gtodoug

iTrader: (1)

I had mine at 825 for the longest time, but I couldn't get my FT's in line at idle. I bumped it up to 925 and it's fine now. It sure sounds good in the 800rpm range though don't it.

Dougie

WS6FirebirdTA00

iTrader: (33)

damn right lol

Another_User

I run mine at 900 rpms. I could run it at 800 without too much trouble, but I don't like idling it that low because it increases the likelyhood of stalling out if I let out the clutch too fast. It would lope nicely though. As it is, you would never know I have a hotcam in it.

SUPRYZE

Mine is at 825. It was real lumpy and sounded like a stock car before I did any tuning. It still sounds good, just alot more stable.

WS6FirebirdTA00

iTrader: (33)

yeah mine sounds good it idle way too rich before. its nice and stable now. on start up when you take off it may take a min for the car to run before the rpms wont drop when slowing. after that min though u can do whatever u want and she wont stall.

luv2spd

iTrader: (1)

I've got mine at 900 right now. It idles fine at 800 but it pulls itself in first better with it set at 900. Its amazing how much smoother the idle is with a tune. Its almost too smooth now!

Pro Mouse

iTrader: (15)

I ran mine 825 the longest time,I had alot of issues with a A4,so I bumped it up to 875 cleared up some idle issues....

WS6FirebirdTA00

iTrader: (33)

yeah its great, i was really suprised after one quick tune how much better the idle got

Black02SS

iTrader: (36)

I have had mine at 800-850 now for about 2 years. No issues.

'Trust'

iTrader: (24)

what do you guys run w/the climate control on? mine is 900 off and i think 1100 w/the a/c on

99FormulaWs6

A couple of guys in our local club have the TR224 and the idle set @ 650 or so, it lopes so freakin hard.

WS6 RULES

I idle my Hotcam at 700. I like the way it runs and sounds, slowing down when I let off the throttle is also what I wanted.

2001CamaroGuy

iTrader: (6)

old 346 w/ TR224 = 800RPM
new 388 w/ 244/249 roller = 1000RPM


I was able to get the 346/TR224 to idle as low as 600 (M6 car) but it was really touchy at times (sounded good though ).......not worth the trouble though.....

Y2K SS

iTrader: (1)

I got my HotCam idling at 925 like others with my M6. I don't know how some of you idling so low with the hotcam. Mine used to be at 800 and it would die out every now and then.

WS6FirebirdTA00

iTrader: (33)

thats what i watned to know, how low i could go, i was thinking about 700-750 i love the lope lol.

y2k ss thats strange maybe u had some problems with some idle airflow values for it not to idle right, i have the f13 and its a 230/232 598/587 112+4 and i can get it to idle 800 no problems at all.

Y2K SS

iTrader: (1)

Yeah.. lol. I did. I recently got a HPtuner and with Dr. Horists help changed everything. Almost done, then I'm gonna try dropping the idle again.

Another_User

My hotcam idles fine at 900 with or without AC on, for the guy that asked above. I wouldn't drop it any more with the AC on though.

Bink

1150 AC on and off.

Magnus

iTrader: (4)

G5X4 with a commanded idle of 950... but when its real warm it will idle around 800 or lower..