Performer RPM Cam
06-03-2005, 01:54 PM
#1
Staging Lane
Thread Starter
Join Date: Oct 2004
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Performer RPM Cam I have been shopping around for different cams and I started looking at the Edelbrock Performer RPM cam. Has anyone used an RPM cam. How'd you like it? How does it idle?
240/246 @ 050
.560/.573 Lift
112 LSA
Advertised is 300/306
Range is said to be 1,500-6,500 RPM
^Taken from summit racing.
I figure it would be a good cam for my RPM manifold and the specs are about what some of you guys have suggested before. I do like the 112 LSA also because of my compression being about 8.5 to 8.7. I also have hooker competition headers, A 750 holley and desirable stock oval port heads on a 454. Its a turbo 400 auto.
If you think there is a better choice could you name a specific cam for my application? Where would this cam actually want to rev up to?
240/246 @ 050
.560/.573 Lift
112 LSA
Advertised is 300/306
Range is said to be 1,500-6,500 RPM
^Taken from summit racing.
I figure it would be a good cam for my RPM manifold and the specs are about what some of you guys have suggested before. I do like the 112 LSA also because of my compression being about 8.5 to 8.7. I also have hooker competition headers, A 750 holley and desirable stock oval port heads on a 454. Its a turbo 400 auto.
If you think there is a better choice could you name a specific cam for my application? Where would this cam actually want to rev up to?
