'02 SLP#686

iTrader: (1)

I am swapping over parts to my new LS6, I used a rollmaster double roller and now I am installing my oil pump and it is touching the chain. Am I supposed to be using shims behind the oil pump?

I really need to get this done ASAP. Any help would be GREATLY appreciated.

nostyta

iTrader: (6)

If it is touching the oil pump it will have to be shimed, you should have recieved some with your double roller setup.

'02 SLP#686

iTrader: (1)

The chain was on the motor with cam installed when I bought it. I need to find some shims... DAMNIT

Thanks man.

HavATampa

iTrader: (49)

Do a search. There is a post from last year with specs and drawings of the 2 shims that can you have made. Good luck on finding the shims without buying another pump. Don't know if it's possible or not.

PREDATOR-Z

https://ls1tech.com/forums/showthrea...ght=pump+shims

If I remember correctly CyphurTraq has a schematic.

HavATampa

iTrader: (49)

Yeah, that's the link I was thinking of. For some, reason the drawings are missing though from Cyphur's post.