Dynamometer Results & Comparisons - Bolton Dyno Numbers

Not that there aren't plenty of posts of bolt-on results, but wanted to put them up anyway for someones future reference.

Car is a 00 6-speed. Mods are SSRA, lid, Shaner S2 TB, LS6 intake, QTP race headers with Pacesetter ORY, with a cutout in the I-pipe.

The numbers on the graph are just so I could see the actual toruq value since it spiked later. 354 hp and 355 torque.

http://memimage.cardomain.net/member_images/2/web/638000-638999/638893_19_full.jpg

Good #'s for a bolt on car.

you just gotta love winpep. just likes to blank out. didn't spike. it quit reading. you should see some of mine i've done. looks like needlepoint where it quits reading. even has loops.

Nice numbers. Now ditch the Y for a QTP Y and see above 360 on both ends.

Not that there aren't plenty of posts of bolt-on results, but wanted to put them up anyway for someones future reference.

Car is a 00 6-speed. Mods are SSRA, lid, Shaner S2 TB, LS6 intake, QTP race headers with Pacesetter ORY, with a cutout in the I-pipe.

The numbers on the graph are just so I could see the actual toruq value since it spiked later. 354 hp and 355 torque.

http://memimage.cardomain.net/member_images/2/web/638000-638999/638893_19_full.jpg


great #'s!

Now ditch the Y for a QTP Y and see above 360 on both ends.

I had Speed put on the Pacesseter Y-pipe after taking off the dual cutout QTP y-pipe that I had.