LoPeY

iTrader: (6)

Working on the cam swap right now. TSP sent all exhaust valve seats and no intake valve seats, is there a difference that would produce any negative effects if the exhaust seats were used across the board? I thought the only difference was temperature resistance, but I'm not sure. Any help would be great! Thanks!

slowpoke96z28

iTrader: (2)

shims or actual spring seats? if you mean the shims, they are the same for Intake and Exhaust.

Jason99T/A

iTrader: (21)

There is no problem using exhaust seals on all 16 valves. Good luck with the install.

Jason

ArcticZ28

iTrader: (14)

yeeep, exhaust seals are made to handle more heat so you can use all exhaust seals, but not vice versa.

LoPeY

iTrader: (6)

Sweet thanks for the help guys. I was pretty sure, I just wasn't positive. I'm back for round 2 tomorrow with that damn number 8 intake valve spring .

ArcticZ28

iTrader: (14)

Yeeep, good luck... I lost/found many a valve keeper doin that one

slowpoke96z28

iTrader: (2)

your post said seats dude. are you talking about seats, shims, or seals?

ArcticZ28

iTrader: (14)

He was talking about seals, saying they sent all exhaust. No one can send valve seats, and shims have no exhaust/intake orientation.

LoPeY

iTrader: (6)

Yeah I mean't seals, I was just in a hurry typing and I said seats. This install is dragging out for sure, but it's definitely a learning experience.