hp numbers on a stock ls1
#1
11 Second Club
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: savannah, orlando, dc
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
hp numbers on a stock ls1
im going to have my car dyno'ed soon and was wondering what to expect. i have a 99 z28 its pretty much stock.
i was wonder what some of you guys dyno'ed stock with your ls1.
i was wonder what some of you guys dyno'ed stock with your ls1.
Trending Topics
#9
12 Second Club
iTrader: (1)
Join Date: Oct 2004
Location: Raleigh, NC
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
My 2002 Z28 M6 dynoed 294/318 with a lid,muffler, cutout at 25,000 miles.
My 2002 Z28 A4 dynoed 324/343 with a lid, muffler, cutout and tune at 25,000. Both of these cars were dynoed on the same dyno. Talk about some varience.
My 2002 Z28 A4 dynoed 324/343 with a lid, muffler, cutout and tune at 25,000. Both of these cars were dynoed on the same dyno. Talk about some varience.
#10
My son's 00 T/A pulled a 300rwhp on a mustang dyno with nothing but a lid and a cat back - if you know about mustang inertial dyno's then you know that they will typically give lower numbers than a dyno jet type. He expects to be around 320rwhp on a dyno jet - on his old setup. Now he has PS LT's, 3" ORY and has installed 4:10's (add no hp but will lower track times) - he is looking for 350rwhp on a dyno jet........and low 12's in the 1/4, his best run previously was a 12.9. My 02 Z is getting jethot LT's, jethot 3" ORY and already has a lid, ported TB and loud mouth CB - I just installed a pro 5.0 shifter, bilstein shocks/struts, b/r springs and am hoping to pull a 330-340rwhp out of a dyno jet here soon.
#15
11 Second Club
iTrader: (25)
Join Date: Nov 2004
Location: Pensacola, FL
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Black 02'Z28
02' Z28 bone stock with 1500 miles 318/323
With Hooker LT's, True Dual, Lid and partial tune 348/388
With Hooker LT's, True Dual, Lid and partial tune 348/388