Dragaholic

iTrader: (180)

Tried Autozone and O'reilly and had no luck. I believe the thread going into the tranny is either going to be 3/8" or 1/2" and I'm using 5/16" tubing. Thanks.

Dragaholic

iTrader: (180)

By the way, the size wrench used is 1/2", not sure that they call the thread that goes into the tranny 1/2".

Ben R

Texas Performance will have it.

BADZ

iTrader: (5)

Ask Brian (MADMAN)

Dragaholic

iTrader: (180)

I looked it up on Summit just to see what the right name for it is and its a 1/4 male NPT to 5/16" inverted flare.

MADMAN

iTrader: (4)

Any auto parts should have them.

Dragaholic

iTrader: (180)

I called O'reilly again and spoke with another person and their computer said they had them in stock, but when he checked the box, they were out. Autozone said they don't even carry them. $1.99 a piece from O'reilly, but they have to order them and can have them there around 5 pm today. I believe the brand was Edelman. Never heard of the brand and forgot to ask what the material was. They're usually out of brass.

Thanks guys for the suggestions!