DreamState23x

iTrader: (4)

I have one valve vover off and noticed that6 of the 8 rocker arms can be wiggled side to side. not much at all but enough for them to go "click click click" when I wiggle them. I checked the torque and they are all torqed. Are they supposed to do this or should they be snug with no side to side movement?

vettenuts

iTrader: (4)

They will move some, especially if that particular valve is not open so the only load on them is the lifter plunger. When you say side to side movement, I assume you mean a slight wiggle not a large movement.

LSUxBlake

iTrader: (3)

Yeah like vettenuts said, as long as the rocker tip is still making constant contact with the valve, it's ok.

silverTA2002

iTrader: (1)

I noticed that too on my install. I guess it's normal.

DreamState23x

iTrader: (4)

Sweet. Thanks everyone.