Stage 2 5.7 & Little Willie H/C Sale
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Stage 2 5.7 & Little Willie H/C Sale
On sale from 10/12/05 to 10/26/05 is our Stage 2 5.7 LS1 Cylinder Heads and our custom "Little Willie" street camshaft sale. Package is proven to 420 rwhp with a stock bottom end and a LS6 intake manifold.
Here are the spec on the heads:
Reconditioned GM 5.7 LS1 cylinder heads
REV Super Duty Valves 2.020/1.570
REV .600 lift Valve Springs
REV Titanium Retainers
Custom Hardened Locators
Viton Valve Seals
The deck are milled to ensure gasket sealing
Lift Int Ex w/o Pipe
.100" 68 56
.200" 143 112
.300" 196 158
.400" 247 190
.500" 280 206
.550" 292 210
.600" 302 214
The "Little Willie" is a street camshaft that makes great power and has great drive ability.
The price for the packaged shipped is $1450.00. The shipping is included for the continental US.
Here are the spec on the heads:
Reconditioned GM 5.7 LS1 cylinder heads
REV Super Duty Valves 2.020/1.570
REV .600 lift Valve Springs
REV Titanium Retainers
Custom Hardened Locators
Viton Valve Seals
The deck are milled to ensure gasket sealing
Lift Int Ex w/o Pipe
.100" 68 56
.200" 143 112
.300" 196 158
.400" 247 190
.500" 280 206
.550" 292 210
.600" 302 214
The "Little Willie" is a street camshaft that makes great power and has great drive ability.
The price for the packaged shipped is $1450.00. The shipping is included for the continental US.
#3
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 72sub
cc volume after milling?
intake port volume?
cam specs?
pushrods/gaskets included?
thanks.
intake port volume?
cam specs?
pushrods/gaskets included?
thanks.
cc volume after milling - normally 62, but that can be changed up to 66.
intake port volume - 224cc
cam specs - under .600 at valve, 224 to 226 range, come on I can't give that away.
pushrods/gaskets included - No, but I can give a deal for people who buy this and go from there, depending on what bolts/studs or manufacture of gaskets they want.
No problem at all.