Boltons+Traction-DS Strength=...
10-17-2005, 02:15 AM
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2004
Location: Surprise
Posts: 1,647
Likes: 0
Received 0 Likes
on
0 Posts
Boltons+Traction-DS Strength=... A two piece drive shaft.
Turns out the the stock DS dosen't like 5500 dumps.
Click here to see Video
Turns out the the stock DS dosen't like 5500 dumps.
Click here to see Video 
10-17-2005, 09:01 PM
#5
TECH Fanatic
iTrader: (9)
Join Date: May 2005
Location: Longview, TX
Posts: 1,085
Likes: 0
Received 0 Likes
on
0 Posts
How many passes did you get out of it? I've got almost the same setup as you -some bolt on's... I"m hoping to get a few passes out of the stocker as I plan on dumping it at 5500-6000
10-17-2005, 10:59 PM
#7
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2004
Location: Surprise
Posts: 1,647
Likes: 0
Received 0 Likes
on
0 Posts
SPEEDYws6- I have around 50 passes on the car. That was about the 5th pass were is dead hooked.
Yeah I had a DS loop in the car. It held everything in one place until it quit wipping around.
Yeah I had a DS loop in the car. It held everything in one place until it quit wipping around.
Trending Topics
10-18-2005, 09:35 PM
#11
SPAM HUNTER
iTrader: (19)
Join Date: Jan 2004
Location: NM
Posts: 4,100
Likes: 0
Received 0 Likes
on
0 Posts
Its about time you broke somthing with your car...i was beginning to think your truck would be the only thing you had that could break itself...well congrats on the break...well kinda...and on hitting the 12's 
10-20-2005, 06:44 AM
#13
12 Second Club
iTrader: (8)
Join Date: Jul 2005
Location: ME
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackZCamaro
Hey, I can't do everything. 
Hopefully you didnt do too much damage to the tranny...
10-20-2005, 11:49 AM
#14
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2004
Location: Surprise
Posts: 1,647
Likes: 0
Received 0 Likes
on
0 Posts
Trans turned out to be fine, only twisted some of the splines on the slip yoke. Putting the new DS in tonight and taking her to the track on firday. 
Chris
Chris
10-20-2005, 12:37 PM
#15
12 Second Club
iTrader: (8)
Join Date: Jul 2005
Location: ME
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by silver98formula
Trans turned out to be fine, only twisted some of the splines on the slip yoke. Putting the new DS in tonight and taking her to the track on firday.
Chris
Chris
10-20-2005, 06:40 PM
#16
Originally Posted by 1_Bad_LS1
Haha! Just giving ya some ****... A tripod would do wonders... either that or don't drink so much coffee...
Chris, we still goin to the Finals in Vegas this weekend or what? Call me!
10-20-2005, 11:22 PM
#18
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2004
Location: Surprise
Posts: 1,647
Likes: 0
Received 0 Likes
on
0 Posts
No more Aluminum for me. .095" wall Steel with 1350 Yokes all around.
1scrudedude- Yeah that would be a pucker factor of 10 if that was to happen.
Chris
1scrudedude- Yeah that would be a pucker factor of 10 if that was to happen.
Chris
10-21-2005, 10:20 AM
#19
I never got good launches by dumping my clutch anyway, I will always slip some.
That must suck anyway, sorry to see it.
That must suck anyway, sorry to see it.
Originally Posted by silver98formula
A two piece drive shaft.
Turns out the the stock DS dosen't like 5500 dumps.
Click here to see Video
Turns out the the stock DS dosen't like 5500 dumps.
Click here to see Video