FS: TNT F1, Harlan 2-Step, LS6 Manifold, FTRA, Much More
10-21-2005, 05:36 PM
#1
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Sep 2003
Location: Burbank, CA
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
FS: TNT F1, Harlan 2-Step, LS6 Manifold, FTRA, Much More We've decided to ditch the EFI and go Carburated, so everything fuel injected related has to go. Parts to be shipped will go standard UPS ground to the 48 states only. I am also listing a special Local Pick Up price.
*TNT F1 Nitrous Kit - $500.00 Shipped / $475.00 Local Pick Up SOLD (ARS)
Kit is in great shape. Some very minor wear and tear scuffs on the bottle from pulling the bottle in and out. Switch and relay included. NO wire fittings included. I will also include a Direct flow lid cuto to length for the TNT Power Ring, and an NOS purge Kit (already installed).
*LS6 Intake Manifold w/ EGR Provision - $350.00 Shipped / $340 Local Pick Up SOLD (weaponZ)
Manifold is in great shape. It does come with the EGR Provision for 98-00 cars. It also comes with a Swedgelock cap that I purchased seperate for anyone who plans to or has already deleted their EGR. No LS6 style coolant tubing or plugs.
*Comp Cams Pro Magnum Rocker Arm Kit - $275.00 Shipped / $250.00 Local SOLD (427 LS1)
Very low milage on these. They were installed on a sand rail that saw very limited use. Once set screw for the adjuster nut is missing. I'm sure this could be bought directly from Comp Cams. Other than the one missing set screw this set is complete with studs, adjuster nuts and guide plates in great shape.
*Harlan Two Step - $150.00 Shipped / $145 Local SOLD (Demon_Speeding)
*Racetronix 1999+ F-Body Fuel Pump Upgrade with Wiring Harness - $150 Shipped / $140 Local SOLD (1QUIKWS6)
Very limited use on the fuel pump. Wiring Harness is still new in bag, never installed.
*Fast Toys Ram Air - $125.00 Shipped / $120 Local SOLD (383ss)
*Stock Fuel Rail and Injectors from LS6 - $100.00 Shipped / $90 Local SOLD (427 LS1)
*SLP Line Lock Kit - $80.00 Shipped / $75 Local SOLD (cook_dw)
Includes preformed lines for installation with stock ABS block and original switch. No wire or wire fittings.
*Stock Throttle Body from 2000 LS1 - $75.00 Shipped / $70.00 Local SOLD (427 LS1)
20,000 mile car.
*Oxygen Sensor Simulators (2) - $45.00 Shipped / $40 Local SOLD (Lawnboy)
Sold as a Pair
*Oxygen Sensor Extensions 12" (2) - $25.00 Shipped / $20.00 Local SOLD (Lawnboy)
Sold as a Pair
*NX Activation Switch 15896 (Less Wire Fittings) - $25.00 Shipped / $20.00 Local SOLD (aram)
*K&N LS1 Air Filter - $25.00 Shipped / $20.00 Local SOLD (G-Body)
Paypal, Cash, or Money Order accepted
Thanks for looking. Any questions/comments please post in thread or via PM.
Ross
*TNT F1 Nitrous Kit - $500.00 Shipped / $475.00 Local Pick Up SOLD (ARS)
Kit is in great shape. Some very minor wear and tear scuffs on the bottle from pulling the bottle in and out. Switch and relay included. NO wire fittings included. I will also include a Direct flow lid cuto to length for the TNT Power Ring, and an NOS purge Kit (already installed).
*LS6 Intake Manifold w/ EGR Provision - $350.00 Shipped / $340 Local Pick Up SOLD (weaponZ)
Manifold is in great shape. It does come with the EGR Provision for 98-00 cars. It also comes with a Swedgelock cap that I purchased seperate for anyone who plans to or has already deleted their EGR. No LS6 style coolant tubing or plugs.
*Comp Cams Pro Magnum Rocker Arm Kit - $275.00 Shipped / $250.00 Local SOLD (427 LS1)
Very low milage on these. They were installed on a sand rail that saw very limited use. Once set screw for the adjuster nut is missing. I'm sure this could be bought directly from Comp Cams. Other than the one missing set screw this set is complete with studs, adjuster nuts and guide plates in great shape.
*Harlan Two Step - $150.00 Shipped / $145 Local SOLD (Demon_Speeding)
*Racetronix 1999+ F-Body Fuel Pump Upgrade with Wiring Harness - $150 Shipped / $140 Local SOLD (1QUIKWS6)
Very limited use on the fuel pump. Wiring Harness is still new in bag, never installed.
*Fast Toys Ram Air - $125.00 Shipped / $120 Local SOLD (383ss)
*Stock Fuel Rail and Injectors from LS6 - $100.00 Shipped / $90 Local SOLD (427 LS1)
*SLP Line Lock Kit - $80.00 Shipped / $75 Local SOLD (cook_dw)
Includes preformed lines for installation with stock ABS block and original switch. No wire or wire fittings.
*Stock Throttle Body from 2000 LS1 - $75.00 Shipped / $70.00 Local SOLD (427 LS1)
20,000 mile car.
*Oxygen Sensor Simulators (2) - $45.00 Shipped / $40 Local SOLD (Lawnboy)
Sold as a Pair
*Oxygen Sensor Extensions 12" (2) - $25.00 Shipped / $20.00 Local SOLD (Lawnboy)
Sold as a Pair
*NX Activation Switch 15896 (Less Wire Fittings) - $25.00 Shipped / $20.00 Local SOLD (aram)
*K&N LS1 Air Filter - $25.00 Shipped / $20.00 Local SOLD (G-Body)
Paypal, Cash, or Money Order accepted
Thanks for looking. Any questions/comments please post in thread or via PM.
Ross
Last edited by bad2000ss; 11-21-2005 at 09:22 AM.
10-22-2005, 12:22 PM
#5
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Sep 2003
Location: Burbank, CA
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
aram, the activation switch is NOT the Throttle position switch. It is the 3 button type that mounts in the center console. Master On/Off for the nitrous, Switch for bottle heater, purge switch, remote bottle opener switch.
Jeramy, sup dude! I'll put those extensions aside for you. Lemme know if you want to come pick them up, or if you want me to UPS them down to you.
Jeramy, sup dude! I'll put those extensions aside for you. Lemme know if you want to come pick them up, or if you want me to UPS them down to you.
10-22-2005, 01:31 PM
#7
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Sep 2003
Location: Burbank, CA
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aram
Hmm.. maybe I'll take that switch setup anyway.. it has one for the opener on it?
Can you ship it to San Diego?
Can you ship it to San Diego?
I can ship it to San Diego. UPS ground would probably take 2 business days.
Trending Topics
10-27-2005, 07:48 PM
#11
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Sep 2003
Location: Burbank, CA
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SIK02SS
are you willing to meet 1/2 way at all? like where the 10 meets the 5?
for the ftra...
also do you have any pics on its condition?
Thanks
for the ftra...
also do you have any pics on its condition?
Thanks
I don't have any pics of it off the car, but its only see 150-200 street miles and the car hasn't been out in the rain once since it was installed. It is in great shape. I still have the block off plate and I believe the original rubber kit that comes with it. (The rubber kit is pretty worthless though. It didn't seal all that well. We just used tape.)
10-27-2005, 08:16 PM
#13
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Sep 2003
Location: Burbank, CA
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SIK02SS
why you sellin it? if you dont mind telling
Ross
10-27-2005, 10:11 PM
#15
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Sep 2003
Location: Burbank, CA
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SIK02SS
ahh, gotcha. how far is colorado from valley or mission?
