PRO 5.0 shifter problem
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Rochester Michigan
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
PRO 5.0 shifter problem
I installed the pro 5.0 and the angled short stick from speed inc. Has anyone who has done this notice it move the shifter location closer to the passenger making 5th and reverse tight? Despite the stick being angled towards the driver the base just seems to be off to the right.
Any thoughts?
Any thoughts?
#2
TECH Addict
iTrader: (3)
Join Date: Oct 2005
Location: SE VA
Posts: 2,255
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ConfusedGarage
I installed the pro 5.0 and the angled short stick from speed inc. Has anyone who has done this notice it move the shifter location closer to the passenger making 5th and reverse tight? Despite the stick being angled towards the driver the base just seems to be off to the right.
Any thoughts?
Any thoughts?
#4
Launching!
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Rochester Michigan
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Yea i have the stick on the drivers side. Also, i agree it looks like its upside down when installed right? So I think the PRO Tower etching was upside down towards the front when installed.
Thats the way I remember it, but I dunno if it is possible to install it incorrectly.
Thats the way I remember it, but I dunno if it is possible to install it incorrectly.