Question about intake centerline.
11-06-2005, 11:03 AM
#1
Question about intake centerline. first off let me make sure that installing the cam on a blowen street motor should be straight up at 0 degrees, is this correct?
my second question is that I purchased a tr224 114lsa cam and was wondering what number do I use as the installed intake lobe centerline?
I would have called tr but there closed and Im sure that someone knows here.
thanks.
my second question is that I purchased a tr224 114lsa cam and was wondering what number do I use as the installed intake lobe centerline?
I would have called tr but there closed and Im sure that someone knows here.
thanks.
