N2O fed 408 car got drug by an LT1??
#1
10 Second Club
Thread Starter
iTrader: (2)
Join Date: Aug 2003
Location: Dallas
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
N2O fed 408 car got drug by an LT1??
Anyone in H-town hear about this??? Talked to the new owner of my old car today and he said he got into a run w/ a stroker LS1 car last night...... Apparently Nick's LT1 has some company beating on some LS1's now... hehe
Although.. He could've been just talking. Dunno for sure. He managed to break the torque arm in half - LOL.. so.. Who knows.
Although.. He could've been just talking. Dunno for sure. He managed to break the torque arm in half - LOL.. so.. Who knows.
#6
Moderator
iTrader: (20)
I heard about this. Guy I met last weekend with a white LT1 Camaro ran with a dark colored Trans Am last night. Camaro is ".030 over 357 LT1" with 150 shot. If the Trans Am really is a 408 on dope, he needs a new engine, tune, or whole new car!!! BTW the LT1 is untuned also.
#7
Are we talking about the White Camaro with the huge system in the back owned by the kid? I met him at the sonic meet and he backed down from my 408 car. I offered to run him on motor vs him on gas and he wouldn't have anything to do with it. He makes too many excuses...
Trending Topics
#8
357 which is .040 over is the same car i'm talking about
i'm not sure if it's the same guy 'cuz he hasn't shown up. he said he was leaving to head over here at 11 PM and it should have taken around an hour.
i would seriously doubt that this car isn't tuned.
i'm not sure if it's the same guy 'cuz he hasn't shown up. he said he was leaving to head over here at 11 PM and it should have taken around an hour.
i would seriously doubt that this car isn't tuned.
#9
10 Second Club
Thread Starter
iTrader: (2)
Join Date: Aug 2003
Location: Dallas
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
it's bored .040 over, and now owned by a kid. So it's got to be the same car... It was tuned (I spent a good 10 hours or so on the dyno sorting it out), but the new owner installed a ported maf which screwed everything up. The factory maf went bad 2 weeks after I sold him the car and the fuel curve ended up being all over the place. It needs some minor tweaking after hearing how lean it's running now. A local shop raised the fuel pressure to get the A/F ratio back into check, but I'm sure doing that left some power on the table somewhere.. But should end up just over 400rwhp . It's mid 390's now... I think.
PS - that huge system is new... Just.. FYI
PS - that huge system is new... Just.. FYI
#12
Tenured Member
Join Date: Nov 2005
Location: Houston/ Ponca City Okla.
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Bull ****
that kid is full of ****!!!! The black formula with the STOCK CI motor that he got outran by Tuesday night when he broke his torque arm (that I told the little **** he did) belongs to a friend of mine, I was in the car when we outran that LT-1 car. If the kid won like he said, why did he pay us the $20.00 we were racing for??? And one more thing, they have the beating on tape, and you can clearly see the formula going around him, so he hits the brakes..... DONT TALK **** WHEN YOU CANT BACK IT UP, or bad things could happen to you!!!!!
#13
TT-TECH Veteran
iTrader: (29)
DONT TALK **** WHEN YOU CANT BACK IT UP, or bad things could happen to you!!!!!
#14
TECH Junkie
iTrader: (12)
Join Date: May 2002
Location: Burleson/Ftw,Texas
Posts: 3,420
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fasstls1
that kid is full of ****!!!! The black formula with the STOCK CI motor that he got outran by Tuesday night when he broke his torque arm (that I told the little **** he did) belongs to a friend of mine, I was in the car when we outran that LT-1 car. If the kid won like he said, why did he pay us the $20.00 we were racing for??? And one more thing, they have the beating on tape, and you can clearly see the formula going around him, so he hits the brakes..... DONT TALK **** WHEN YOU CANT BACK IT UP, or bad things could happen to you!!!!!
#15
TECH Resident
iTrader: (23)
Join Date: Aug 2005
Location: DFW, Texas
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fasstls1
that kid is full of ****!!!! The black formula with the STOCK CI motor that he got outran by Tuesday night when he broke his torque arm (that I told the little **** he did) belongs to a friend of mine, I was in the car when we outran that LT-1 car. If the kid won like he said, why did he pay us the $20.00 we were racing for??? And one more thing, they have the beating on tape, and you can clearly see the formula going around him, so he hits the brakes..... DONT TALK **** WHEN YOU CANT BACK IT UP, or bad things could happen to you!!!!!
#17
Launching!
Join Date: Feb 2005
Location: Woodlands,TX
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Hey im the owner of the black formula. Sorry about my friend, he gets a lil excited. My car is a stock c.i. ls1 on a 100 shot. We raced twice, the first time i took him by a couple cars, the second time with hardly any bottle pressure, and being in & out of the throttle on the jump, i still came around him. Just wanted to make that clear, thats all.
#19
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
I watched the race and video..
definately were not 2 or 3 cars...
I would give you half a car if memory serves correct of the pass with the camera man INSIDE the LT1 correct...
definately were not 2 or 3 cars...
I would give you half a car if memory serves correct of the pass with the camera man INSIDE the LT1 correct...
#20
Launching!
Join Date: Feb 2005
Location: Woodlands,TX
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
sorry well i was estimating, since i could see his lights through the back glass. I wasn't going to stick my head out the window and look back to see exactly. next time ill measure it for you exactly sir, would that do.. and i never said three...if i recall i said a couple as in TWO....so im not sure if you should trust your memory.
Last edited by 88GT&69ss; 11-17-2005 at 06:51 PM. Reason: add to comment