11-18-2005, 03:08 PM
Are wheel spacers ok for drag racing?? the spacer is a 1&1/2 spacer.
11-18-2005, 03:19 PM
An inch and a half? I would not do that at all.
11-18-2005, 04:33 PM
Typical slip on type spacers are REALLY hard on wheel studs, the thicker they are the worse it is. I wouldn't even consider one thicker than about 1/4" in that type.
However, a 1-1/2" HUBCENTRIC type spacer that bolts to the axle first would probably be OK on a LS1 car with average power.