New LS1 stuff for sale...
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Location: Cape Cod, MA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
New LS1 stuff for sale...
Well I wanna pick up a new project car that will be a daily driver so the plans of building a LSx motor for my 88 Monte SS will be put on hold.
I've got the following parts for sale. All are zero mile, stock, virgin pieces. Will have pics once I get back from school next Wednesday night. Well here goes...
LS1 block, zero mile, w/ main caps-$400/bo
LS1 pistons/rods w/ rings-$150/bo
Front, rear, and valley covers-Bo
New LS7 intake for sale w/ fuel rail (intake is $260 alone then $95 for the specific rail)-$325/bo
New set of LS7 injectors, believe these suckers are 39lb-$175/bo
LS2/LS7 90mm TB-$175/bo
Corvette oil pan w/ pickup-$130/BO
Also have stock oil pump, cam, pushrods, waterpump, manifolds-BO
New GM MLS head gaskets for newer LSx motors
Also have the JohnB modified Fbody oil pan and frame side motor mounts that make dropping in a LSx motor in a G body (78-88 Malibu, Monte, Regal, Cutlass, El Camino) a bolt in and go. The modified parts cost $400 plus the cost of the pan. I'm looking to get $400 b/o for em and keep your old pan. Brand new
If you have any interest, please email me at montess355@yahoo.com or PM me. I'm a little neogtiable on the price but I paid a pretty penny for these so I'm just looking to get some money back. I'd like them gone.
Thanks
Nick
'88SS
I've got the following parts for sale. All are zero mile, stock, virgin pieces. Will have pics once I get back from school next Wednesday night. Well here goes...
LS1 block, zero mile, w/ main caps-$400/bo
LS1 pistons/rods w/ rings-$150/bo
Front, rear, and valley covers-Bo
New LS7 intake for sale w/ fuel rail (intake is $260 alone then $95 for the specific rail)-$325/bo
New set of LS7 injectors, believe these suckers are 39lb-$175/bo
LS2/LS7 90mm TB-$175/bo
Corvette oil pan w/ pickup-$130/BO
Also have stock oil pump, cam, pushrods, waterpump, manifolds-BO
New GM MLS head gaskets for newer LSx motors
Also have the JohnB modified Fbody oil pan and frame side motor mounts that make dropping in a LSx motor in a G body (78-88 Malibu, Monte, Regal, Cutlass, El Camino) a bolt in and go. The modified parts cost $400 plus the cost of the pan. I'm looking to get $400 b/o for em and keep your old pan. Brand new
If you have any interest, please email me at montess355@yahoo.com or PM me. I'm a little neogtiable on the price but I paid a pretty penny for these so I'm just looking to get some money back. I'd like them gone.
Thanks
Nick
'88SS
Last edited by LS2Monte; 11-19-2005 at 01:54 PM.
#3
On The Tree
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Location: Cape Cod, MA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Following parts are spoken for
Crank
Lifters/guides
LS2 coils
LS1 block
Still have
LS1 pistons/rods
Front/rear/valley covers
Corvette pan and pickup
Stock set of pushrods
LS7 intake w/ LS7 fuel rail
Set of LS7 injectors
LS2/LS7 90mm drive by wire TB
The mod'd f body pan and motor mounts are pending...
Shoot me a PM w/ offers...wanna move this stuff soon
Thanks
Nick
Crank
Lifters/guides
LS2 coils
LS1 block
Still have
LS1 pistons/rods
Front/rear/valley covers
Corvette pan and pickup
Stock set of pushrods
LS7 intake w/ LS7 fuel rail
Set of LS7 injectors
LS2/LS7 90mm drive by wire TB
The mod'd f body pan and motor mounts are pending...
Shoot me a PM w/ offers...wanna move this stuff soon
Thanks
Nick
#5
On The Tree
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Location: Cape Cod, MA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
They are the GM MLS gaskets. Will work on either LS2 or LS1 heads. They are for the 02-up LS1 heads I believe.PN 12498544 Cost me $35 to my house. Will sell for $27 shipped. Any interest in new GM head bolts?
Thanks
Nick
Thanks
Nick