Xtnct00WS6

iTrader: (8)

Are there any problems with putting LS6 heads on an ls1?

I read an article that says the exhaust port moved .125 for better flow. Will my Pacesetter headers still work fine and bolt up? How about my LS1 intake, will that NEED to be upraded to the LS6 to work?

Here's the article I'm referring to:

http://www.corvettefever.com/techarticles/18479/

davered00ss

iTrader: (4)

A lot of people run ls6 heads on ls1's. Never heard of a problem.

dudas35

iTrader: (4)

The floor of the port was moved up to increase flow, the port itself was not moved.

Phil'sC5vette

iTrader: (4)

Your car will work fine

orangeapeel

iTrader: (18)

I thought that this was actually fairly a common choice.

99C5Coupe

The article says you will have to use the LS6 intake and throttlebody with these heads.

Xtnct00WS6

iTrader: (8)

Yeah, that's the wierd part. I've heard of people doing it too and with no problem. I'm sure the LS6 intake would work much better than my LS1, but I dunno if it's actually NEEDED to work.

kenp

iTrader: (9)

The LS1 intake will work.

Firehawk441

iTrader: (41)

Just bolt them on

orangeapeel

iTrader: (18)

Most people that are doing heads will most likely end up with a FAST intake or an LS6 anyway.