Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Stuck clutch pedal and strange shifter behavior.

Thread Tools
 
Search this Thread
 
Old 11-21-2005, 05:24 AM
  #1  
TECH Regular
Thread Starter
iTrader: (4)
 
shep28's Avatar
 
Join Date: Jun 2004
Location: Beachwood, Ohio
Posts: 486
Likes: 0
Received 0 Likes on 0 Posts

Default Stuck clutch pedal and strange shifter behavior.

I took my z out for a spin yesterday- first time in over a week. Car was warmed up. After some hard driving, the clutch pedal did not come back up after I depressed it. Had to "pull" it back up with my hand. B and M Shifter had a "notchy" feel and fought going into 3rd at wot- this seems to happen frequently. Does this seem like a hydraulic issue? I have been thinking about updating my 1999 slave cylinder. Clutch is in good shape- I think. Original after 26000miles of weekend cruising- no big burnouts or track time.
Old 11-22-2005, 12:16 AM
  #2  
TECH Fanatic
iTrader: (31)
 
CW00BlackTA's Avatar
 
Join Date: Jun 2004
Location: Mesa, AZ
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts

Default

Could be a number of issues. Your mods indicate a power level that will likely overwhelm a stock clutch. It could be slipping. It could also be a hydraulic issue. I've experienced both. If it were me, I'd plan for an upgrade--new clutch, pressure plate, resurfaced or new flywheel (depending on how stock one looks), upgraded slave cylinder and new pilot bearing.




All times are GMT -5. The time now is 06:52 PM.