View Full Version : Dyno Reading


leftme4dead
11-26-2005, 07:33 PM
I have 2 questions. 1st question is what is the approx driveline loss on an A4, I know for an M6 its about 15% percent. This leads me to my 2nd question. I dynoed @ 303.8 rwhp and 313.4 rwtq, what do those numbers equate to @ the flywheel approx?

ls1wannabe
11-27-2005, 09:46 PM
not more than twenty, those are pretty strong numbers was that on a dyno jet or a mustang dyno? 12.94 @ 114 what kind of a tire was that on that is a very high trap speed for being almost stock.

leftme4dead
11-28-2005, 05:51 PM
It was on a dyno jet, I ran that time w/goodrich cheaters but I also had a half tank of gas mixed with 5 gal 110 octane

beardWS6
11-28-2005, 06:05 PM
I think 18%-19% for a A4. Was it conv locked or unlocked?

'Trust'
11-28-2005, 06:37 PM
If hes on the stock converter i'd bet its unlocked, but as far as your power 359/381 (18% loss) at the motor, which is pretty strong, mine did 316/341 w/a lid and cut out at the wheels so do that and your in the money