V-10 Killer

iTrader: (22)

I just placed an order with on of our sponsors for a camshaft for my new 402, and the one I got is slightly different than what was advertised on their website. Seems a lot like the last order I placed with them (ordered a Delphi 85mm MAF, got a SLP MAF)...

Anyway, should I keep this cam?
This is what it's supposed to be:
242/250 .611"/.619" 114 LSA

Here's what I got:
242/250 .593"/.609" 114+2 LSA

So here's my question. Would I see significantly less (more than 5hp) power with 0.018" less intake lift and 0.010" less exhaust lift.

ls1wannabe

iTrader: (2)

not really

stevewix

probably not. the only thing that may be different is ramp rates, if the higher lift cam has a slower ramp rate you'd lose power. in this scenario ramp rates are more important then a negligible amount of lift.

777

iTrader: (21)

You didn't get what you were supposed too, send it back. A good company would discount it for your troubles and downtime.