Big Bore head gaskets??
12-03-2005, 11:33 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (26)
Join Date: Mar 2004
Location: Long Island
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Big Bore head gaskets?? Are there any problems with using a head gasket for bigger bore motors on a stock bore? Any sealing or leaking issues?
I'm thinking of using this because I like the compression thicknesses better but if I'll have problems then I'll look for something appropriate in a stock bore gasket.
I'm thinking of using this because I like the compression thicknesses better but if I'll have problems then I'll look for something appropriate in a stock bore gasket.
12-05-2005, 08:48 PM
#4
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Fairview Heights Illinois
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
I tried the metal 6.0 liter gaskets on 98 heads and that won't work.
The heads were the problem, not the block.
The heads were the problem, not the block.
Last edited by white2001s10; 12-06-2005 at 09:25 AM.