2000 m6 SS

im looking to put a couple of performance parts on my 2000 camaro ss no headers or anything like that but im looking into a aftermarket y-pipe an electric cutout i already have a throttle body and ram air intake car runs good it just needs a little bit more sound and get up so please help with what to buy and where to buy it thanks

SouthFL.02.SS

No use in getting an aftermarket Y-pipe if you're not going to get headers.
An elec. cutout in the I-pipe (the pipe that goes from the Y-pipe to the over-the axle pipe) will make things loud enough, and free up a few ponies. If you haven't gotten an induction lid by now, do so, it's worth about 10hp and it's the easiest thing to install.

2000 m6 SS

what kind of electric cutout alot of people have there own kind that they like what brand and where to get one all help is well appreciated thanks

SouthFL.02.SS

QTP--->
Sponsor

300bhp/ton

If you plan on more mods in the future such as a good exhaust setup then a cut-out will become pretty pointless.

If the exhaust is designed well it should have little or no effect on the flow rate, so a cut will not help here. The only thing it will do is effect the exhaust pressure wave, but it's easy to effect it in the wrong direction.

Try the links in my sig for help, and have a look through the sticky's in this forum and the New to LS1's forum.

SouthFL.02.SS

Sometimes cutouts are just plain fun (despite the small gains on a mild setup).
It would also free up a few ponies over the stock catback (and yes, while changing the available tq to a much higher point in the rev range).