Few questions for those who care
#1
9 Second Club
Thread Starter
iTrader: (15)
Join Date: Jan 2005
Location: waldorf,md
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
Few questions for those who care
I had a 12bolt rear w/ 4.10's and bmr extreme duty sway bar. Sold 12 bolt. I'm buying a 9 inch. I use nitrous (150 right now). M6. 70%track 30% street. 400rwhp 380rwhp. I have big plans for the future (forged internals, afr heads, fast setup and so on)
Question 1. What gears are best suited for a nitrous car in my situation ?
2. Will the bmr extreme duty sway bar handle a car trying to get into the mid 9's.
3. The torque arm I have mounts to a plate that forms around the inside of the trans tunnel. It was made by edelbrock (or at least sold by them). It looks pretty strong but is it time for a better torque arm Like madmans ?
It's winter time and i'm building again. Now is the time to replace this stuff while there is no rear in the car. Thanks ken
Question 1. What gears are best suited for a nitrous car in my situation ?
2. Will the bmr extreme duty sway bar handle a car trying to get into the mid 9's.
3. The torque arm I have mounts to a plate that forms around the inside of the trans tunnel. It was made by edelbrock (or at least sold by them). It looks pretty strong but is it time for a better torque arm Like madmans ?
It's winter time and i'm building again. Now is the time to replace this stuff while there is no rear in the car. Thanks ken