SgtB

iTrader: (3)

Just curious because it seems like I am the only one.

If you have one which one?
Do you like it?

JaSSon

iTrader: (11)

I Have an X1 and it just dynoed 426.5 rwhp and 386.9 rwtq. with a 90/90.

SgtB

iTrader: (3)

really...I have the Z1 and am very anxious to get it dyno tuned here shortly.

94redz28

iTrader: (12)

I have the T1 and it loves spray

JoeyGC5

iTrader: (24)

I've had the C2 for over 2 years. Dyno'd 428/405 with Patriot Heads, no cats and full exhaust in my vette Thinking about going to the Futral F9 now

SgtB

iTrader: (3)

So it seems like everyone is happy with theit cams...thats good.

Hopefully within a month here I can get mine dyno tuned

Azrael

iTrader: (10)

We have an X1 waiting to go in... Just have not had the time to actually do it...

P Mack

iTrader: (6)

I have the c1 and like it, but i'm not keeping it when the shortblock goes in.

SgtB

iTrader: (3)

This is good to hear. So has everyone gotten satisfactory results....

MARKSZ71

iTrader: (3)

mti has really good stuff i just think other shops have caught up with them now days

CamTom12

iTrader: (1)

I had a C1 (well, still do... It's coming out of the car tomorrow night) and have been VERY happy with it

Best e.t. - 12.1 with launch issues.

casey02ws6

iTrader: (2)

Another C1 here. This is my first cammed car so I don't have a real good frame of reference but lots of guys in my club have run several different MTI cams and have all had good results. The C1 is really small by todays standards but I am happy with the numbers.

jlrz28

iTrader: (7)

I have an old MTI cam I got a good deal from them on it a while back its an A1. Just what I wanted though for my daily driver. 216 220 and .522 .522 on 116lsa

98A4LS1

iTrader: (1)

What type lobes does MTI use? ie, X-ER, cam motion, Crane, etc.
I'm thinking about their 224/228 0.563/0.563 113 LSA

PREDATOR-Z

They used to use LUNATI but I think they discontinued that.
I know they use Comp (At least for mine)
I had Stealth II, really nice cam, good trq, rpms, street manners etc...
Managed 429 rwhp with 2.5 heads (5.3L)
But it is out today and I'm sticking in a 232/234 (TSP-Torquer Rev 2)

Derek98z

iTrader: (55)

My first cam was a C2. Loved it and it pulled hard with stock gears. Put down a very respectible 374/376 with bolt ons and a LS1 intake

Mirek

C1 - Lunati Grind
Perfect for the street -- cam comes on at 2500 and just pulls.

00T\A

MTI B-1 here old Lunati grind.
392 rwhp 371 tq stock heads.

99zee

iTrader: (4)

I have the T1. Its been in a little over 2 years. Thinking about going bigger and adding some heads.