BoneSS

iTrader: (9)

Trying to make myself buy some to put behind my 19 inch Evo's...so help me out

GotV-8

iTrader: (15)

Here are my Brembos, behind 19's. Behind the stock wheel it fills it up.

SSilverSSurfer

iTrader: (8)

^^^^damn those ginormous wheels make them look so small

BoneSS

iTrader: (9)

Thanks! That is what I am afraid of--looking too small.

BackinBlack02SS

iTrader: (7)

Those are factory replacement, crossdrilled rotors? How much lighter are they than stock?

Ravenous T\A

iTrader: (12)

here's mine

Danny2tek

iTrader: (1)

AutoZone rotors

karkrazie626

Ravenous, I think your rotors are on the wrong side. I could be wrong, maybe mine are on wrong. But the slot should be flairing out from the caliper like gotv-8"s pic above, thats the direction mine go. Does the direction of the drill and slot matter? I know the heat has to be vented in a certian flow. Anyway someone please correct me if Im wrong...

Ravenous T\A

iTrader: (12)

well mine said R & L on them, so I installed according to that. 5.0 hater is installed like mine too.

karkrazie626

Interesting... I need to look this up. My rotors could be on wrong.

DVST8OR

iTrader: (7)

Baer GT+ surrounded by 18's

Luna

iTrader: (6)

lol thanks for reminding me how badly I need new rotors! I hear the slotted ones eat up pads alot faster, how true is that ? enough to justify not getting them ?

steveo346

iTrader: (18)

damn dvst8or your car is freaking sweet mang seriously mad props ....im actually gonna get some crossdrilled ones from pep boys next week for $50 a rotor...i'll post pics as soon as i get them

FrozenMonkey

Drilled + Slotted is a bit overkill for a street car really. If its just for looks then its fine and looks great but eats up pads a bit quicker. If you really need more stopping power and are concerned about cracking your rotors or burning pads then go with just slotted. I was about to post pics of my wonderful cracked rotors but i can't find em and its freezin outside

BoneSS

iTrader: (9)

DVST8OR--how big are those rotors?

Pipelayaz

iTrader: (2)

I plan on getting the stock size Baer zinc washed, drilled & Slotted rotors for the front. The Eradispeeds are lighter due to the black anodized aluminum center hub. I think they look bad azz and with my calipers painted black it should be a nice lil mod to replace my warped rotors. I also have HAWK pads which should help for braking at the track.

Nice ride DVST8OR...one of the cleanest Camaro's Ive seen.

98-mongooSSe

iTrader: (2)

Here's my cheapies...

Shay

BoneSS

iTrader: (9)

How big in diameter are the irotors?

DVST8OR

iTrader: (7)

Steve0346 and Pipelayaz - thanks for the compliments

BoneSS - fronts are 13.15" in diameter and the rears are just Eradispeed rotors to match the front, they are 12" in diameter

BoneSS

iTrader: (9)

Thanks! By the way, awesome lookign car! I was looking for silver when I found my SS. I have always thought silver looks the best across the board, and yours looks especially clean!