onefastss223

iTrader: (14)

Alright guys, here it is.
-347 LS1
-Weisco Pistons
-polished crank
-222/230 .574/.580 114 + 4LSA(CamMotion)
-Patriot 6.0L Stage II heads(72cc, 2.02/1.57)
-ATI P1-SC with 7" crank and 3.5" blower pulley(6-rib)
-Alky Control Methanol Kit
-M6(if you wanted to know)
-CR around 9.4-9.5ish
On the old setup, I had MTI stage 2E 5.7L heads, and the MTI C1 hammerCam(222/222, not sure on lift, 112lsa). I also had the 4.1" blower pulley. At 7lbs it put down 550rwhp/499rwtq with no methanol.

CAR SHOULD BE BACK TOGETHER NEXT WEEK...

What do you guys think I should put down with the new heads/cam/meth/pulley? I'm thinking 600-630 or so.

Any input is welcome...

ddnspider

iTrader: (26)

depending on how much boost id imagine 600-625ish with meth like you said.

Phil99vette

iTrader: (11)

A H & C P1SC corvette just went 70x over on corvetteforum.com.
Phil

ddnspider

iTrader: (26)

At how many #'s?most get maxed out about 600 or so.

Phil99vette

iTrader: (11)

http://www.z06vette.com/gallery/data...Dec_05_SAE.JPG

ddnspider

iTrader: (26)

i wasnt doubting you,i asked how many psi that was at?

Pro Stock John

iTrader: (34)

Depending on how much boost you can make with those pulleys, I'd say 600-650rwhp.

Phil99vette

iTrader: (11)

Its all good, I just wanted to post the thread and dyno graph, pics are always worth 1000 words.
Phil

ddnspider

iTrader: (26)

true that....gotta love torque at a 45* angle!

onefastss223

iTrader: (14)

Thanks for the input guys....I'm optimistic that I'll see something closer to 650 but dont want to get my hopes up. As long as it runs like a bat out of hell I'll be more than happy...