Pics of modified stock LT1 maf
01-02-2006, 06:30 PM
#1
On The Tree
Thread Starter
Join Date: Dec 2005
Location: ohio
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Pics of modified stock LT1 maf Please post before and after pics of the LT1 maf.What not to touch when porting and what not.Is there much to gain on a bolt on car from this?
01-02-2006, 07:59 PM
#5
All you will accomplish is ruining the calibration which might lead to a temporary power gain till the O2s see the accross the board lean condition and the pcm begins dumping fuel to correct. It is not a restriction, the stock tune is a little rich and grinding on the MAF can temporarily lean that out that is how you can see a temporary power gain.
The RIGHT way to see that power gain and more is pcm reprogramming by someone like pcmforless.com, madz28.com, Ed Wright the list goes on, all are better and many are cheaper than the HyperCRAP.
The RIGHT way to see that power gain and more is pcm reprogramming by someone like pcmforless.com, madz28.com, Ed Wright the list goes on, all are better and many are cheaper than the HyperCRAP.
