Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

what to do next

Thread Tools
 
Search this Thread
 
Old 01-10-2006, 03:03 PM
  #1  
Launching!
Thread Starter
iTrader: (1)
 
99 Predator's Avatar
 
Join Date: Dec 2005
Location: Marlboro, NJ
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
Default what to do next

i have the mods listed below and now im really stumped as to what to do next. any suggestions? i was thinking headers and an ory, but not sure if maybe i should get a TC. my cars a daily driver but will probably see the track a few times a year. another thing i had in mind were 3:73's.
Old 01-10-2006, 03:19 PM
  #2  
Banned
 
WsSickLs6's Avatar
 
Join Date: Jul 2005
Location: phoenix
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

i'd go with a nice set of longtubes...
Old 01-10-2006, 03:28 PM
  #3  
On The Tree
 
macool68's Avatar
 
Join Date: Mar 2003
Location: South Florida
Posts: 124
Received 0 Likes on 0 Posts

Default

tightening up the suspension makes any DD more fun to drive to work. sway bars, stb, sfc's, lca's or shocks (if you have the $ for them) are where you'd normally start. If you're all about speed and e.t.'s, go for a set of headers.

Personally I've been holding off on the TC because i drive in traffic daily; the thought of trollin around at ~3k rpm although sounding fun is not appealing to me. I don't know where you have to drive, but 3.73's would hurt your gas mileage on a daily driver.

IMO




All times are GMT -5. The time now is 05:42 PM.