new dyno numbers with my cam only daily driver
#1
Banned
Thread Starter
iTrader: (2)
Join Date: Jun 2005
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
new dyno numbers with my cam only daily driver
i threw a new cam in the daily driver last weekend and had a few pulls made today untuned
the cam is an MTI R1 that i got used off here, stock 853 casting heads, hooker LTs, TP duals, ASP pulley, LS6 intake. '00 TA, M6, 3.42.
1st pull: 392/372 on the first pull with an afr of about 13.7-14
2nd pull: 395/375 afr was just about the same
un-corrected it was about 405/385 so i expect about 415-420 with a good tune in it, needless to say i am very happy with the results with this cam.
i have to thank SQR (board sponsor) for getting my car on the dyno tonight on short notice and being very friendly in the process and talking with me about the tune for the future. heads are next and then a new clutch and some 4.10s then a tune! should be a fun spring...bring on the tax return!!
JM
the cam is an MTI R1 that i got used off here, stock 853 casting heads, hooker LTs, TP duals, ASP pulley, LS6 intake. '00 TA, M6, 3.42.
1st pull: 392/372 on the first pull with an afr of about 13.7-14
2nd pull: 395/375 afr was just about the same
un-corrected it was about 405/385 so i expect about 415-420 with a good tune in it, needless to say i am very happy with the results with this cam.
i have to thank SQR (board sponsor) for getting my car on the dyno tonight on short notice and being very friendly in the process and talking with me about the tune for the future. heads are next and then a new clutch and some 4.10s then a tune! should be a fun spring...bring on the tax return!!
JM