cali cam help guys.
01-23-2006, 07:26 PM
#1
12 Second Club
Thread Starter
iTrader: (18)
Join Date: Jul 2004
Location: Nor Cal
Posts: 1,255
Likes: 0
Received 0 Likes
on
0 Posts
cali cam help guys. Ok ive decided CAM TIME! But!! I want to pass emissions still.. So what good cams are you guys running for some decent/good HP for street legal.. i dont have any engine work done just mods below.. And any good reliable shops in the sacramento area that dont charge an arm and a leg?
Trending Topics
01-24-2006, 01:19 PM
#9
Originally Posted by 02NHRAtransAm
who makes the 224 224 114 that u guys are running??? i plan on putting one in our SS... does it sound pretty radical or can u even tell???
01-24-2006, 01:21 PM
#11
Originally Posted by 8GTOKLR
I going with Crane Cam 216/224 .551 lift 115lsa..there is guy I am getting it from on here has it with LT's and Heads he puttin 408rwhp down..
01-24-2006, 03:02 PM
#13
TECH Fanatic
iTrader: (17)
Join Date: Dec 2005
Location: Visalia, CA
Posts: 1,596
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1 BLOWN V8
From the front you cant tell you even have a cam. From the rear you can slightly tell its thier. The car will also have just a slight shake to it.
01-24-2006, 05:18 PM
#14
SSU's Drunk Typing Whore
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dan
What springs do you guys run with this cam? I will probably keep the stock heads. I already have the LS6 Springs & Cam Installed..Thanks
01-24-2006, 05:34 PM
#15
i bet with a good tune you could pass with 228-232, i have seen people pass with the old mms 229 cam, plus the 228 - 232, make real nice power, mind you it will most likely pass on the ragged edge, and will most likely need to be pretty hot (cats).
01-24-2006, 05:40 PM
#16
TECH Enthusiast
iTrader: (6)
Join Date: Apr 2005
Location: Socal
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1 BLOWN V8
That is a real small cam you are looking at. I think you may want to look into the 224/224 114lsa with 581 lift instaed. I passed smog no problem with this cam.
01-24-2006, 07:08 PM
#17
Launching!
iTrader: (3)
Join Date: Nov 2001
Location: Long Beach, CA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dan
What springs do you guys run with this cam? I will probably keep the stock heads. I already have the LS6 Springs & Cam Installed..Thanks
