Convertible Vehicles - LTs and drop?

Just curious to see who all has a drop with LTs on their verts? I currently have a spohn TA mounted to the tranny as well. Some help here would be great. Thnks guys.

I wouldnt worry much about headers scraping as i would exhaust scraping. Go with pacesetters, they tuck up quite nicely.

My LT's scrape with stock springs.

My LT's scrape with stock springs.

Here is a pic after I installed Pacesetters on my car, as you can see by the wd40 can there is several inches of clearance, this is with stock springs.



http://i5.photobucket.com/albums/y174/PSYKOZ28/DSCN1222.jpg

Hmm. I dont drive like a nut, and I never scrape anything as the car is now. But Im still a little apprehensive about it. Can anyone with a lowered car jump in?

Here is a pic after I installed Pacesetters on my car, as you can see by the wd40 can there is several inches of clearance, this is with stock springs.



http://i5.photobucket.com/albums/y174/PSYKOZ28/DSCN1222.jpg
I'm using hooker LT's. I wasnt implying anyone elses would scrape, I was just saying mine does although I'm starting to thinks my shocks and springs are worn.

if you decide to lower it just make sure you definatley dont get SLP headers...mine hang lower then the factory bodykit and scrape on just about every speed bump :(