flex plate and starter
02-02-2006, 11:39 AM
#1
11 Second Club
Thread Starter
Join Date: Dec 2004
Location: Augusta,Ga
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
flex plate and starter Car has trouble starting,and has a shake/rattle coming from that area, so im assuming these two need to be replaced...
about how hard is the job,and about how much should I pay for these parts?
car is an auto 95 z28.....the car starts and seems fine.....the auto tranny does shift from 1-2 hard but nothing seems to be slipping at all.....
about how hard is the job,and about how much should I pay for these parts?
car is an auto 95 z28.....the car starts and seems fine.....the auto tranny does shift from 1-2 hard but nothing seems to be slipping at all.....
02-02-2006, 05:15 PM
#4
TECH Fanatic
iTrader: (22)
Join Date: Dec 2004
Location: Fishers, IN
Posts: 1,232
Likes: 0
Received 0 Likes
on
0 Posts
I would check the starter 1st. Once the starter is removed check the teeth and manually rotate the crank and check the teeth on the flywheel. Does the starter require a shim?