New to transmissions, gotta few questions..
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Mar 2004
Location: Phoenix, AZ
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
New to transmissions, gotta few questions..
hey guys i have a few questions. my first is this.. in this first pic im showing, what is #1 and #2? and in pic 2 whats the blue hose for and am i missing anything? thanks!
#2
TECH Fanatic
iTrader: (6)
Join Date: Oct 2002
Location: Charlotte metro area
Posts: 1,959
Likes: 0
Received 3 Likes
on
3 Posts
1 is the skip shift solenoid electrical connecter.
2 is the bore wher the speed sensor should reside.
pic 2 blue hose....It is not a trans part but Ill play the game:
Its an air line from your power tool.
Its one of those old line you run over at the gas station to make the"ding"
Its a King Kong jump rope.
Is it an insulated CSC feed line? You don't show where its attached so Ill guess the CSC.
2 is the bore wher the speed sensor should reside.
pic 2 blue hose....It is not a trans part but Ill play the game:
Its an air line from your power tool.
Its one of those old line you run over at the gas station to make the"ding"
Its a King Kong jump rope.
Is it an insulated CSC feed line? You don't show where its attached so Ill guess the CSC.
#3
Launching!
Thread Starter
iTrader: (8)
Join Date: Mar 2004
Location: Phoenix, AZ
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
ok cool. are the skip shift and vss on the engine wiring harness or a different harness? here is a pic of where the blue hose connects..
and what is it? what does it do? thanks!
and what is it? what does it do? thanks!
#6
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Camaroholic
Hose is a vent tube. Yours is not stock. Stock is a hard black plastic tubing line. If you put too much fluid in the tranny, that's where it goes when it gets hot.