SuperZ

iTrader: (2)

Well Dyno week is here!! Im excited and kinda nervous to.I am going to be dynoing on a superflow corrected for dynojet numbers so it shouldnt have problems loading the car.This will also give Frcefed I better estimate on what his car is making since our setups are almost the exact same.I think Im going to use some juice on the dyno also.You guys got any guesses on what it will make??Mods are in sig and I will be running 12-15 psi.Thanx guys!

cputech

Good luck....Not sure on what you might make though.

frcefed98

iTrader: (16)

RIGHT ON! When is the big day? I hope you put down what you want it to put down. I was truly hoping to walk away with a 600+ dynosheet that day, and I walked away let down.

I'd think that our #'s would be pretty close too.
J

2002 Trans Am

Make some low psi runs too (like 7-8) and tell us (or just me) what it puts down.....

SuperZ

iTrader: (2)

Thursday is the day! I also really hope to make 600+hp but we will see.Im going to do two boost only runs and one nirtous run.

frcefed98

iTrader: (16)

Nitrous is fun, on my stock block D1-SC setup, I ran a 50 shot(if I remember right..coulda been a 75), knocked off a solid 2 tenths at the track and added 4mph
12psi + 50shot is a lot of fun.
J

RealQuick

iTrader: (14)

Sweet. Post some pics.

ABeasst

iTrader: (5)

cputech I love your sig and agree

SuperZ

iTrader: (2)

I will post up some vids and the graph asap when we are done! Hope it does good!!!!

frcefed98

iTrader: (16)

are you going to be logging with HPT or efilive? I'd like to know what your injectors duty cycles in relation to the power you put down....60lb moto's right?
J

Blown SS

iTrader: (13)

Good luck man !!!

SuperZ

iTrader: (2)

I can probably use a friends auto tap.I know you can log with it and watch short and long term feul trims and knock.Im not sure if you can see injector duty cycle or not.Yea they are Mototron 60s