Dyno #'s estimate
#1
Dyno #'s estimate
355 11.7:1 cr
CC503 112 lsa 224/230 .553 .561 using 1.65 ratio RR
heads p&p flow #'s
.100 64 57
.200 136 112
.300 180 148
.400 219 169
.500 251 183
.600 268 196
im running through an M6 3.42 gears and the rest of my mods in my sig
Thanks for any response
CC503 112 lsa 224/230 .553 .561 using 1.65 ratio RR
heads p&p flow #'s
.100 64 57
.200 136 112
.300 180 148
.400 219 169
.500 251 183
.600 268 196
im running through an M6 3.42 gears and the rest of my mods in my sig
Thanks for any response
#5
Originally Posted by roughneck427
355 11.7:1 cr
CC503 112 lsa 224/230 .553 .561 using 1.65 ratio RR
heads p&p flow #'s
.100 64 57
.200 136 112
.300 180 148
.400 219 169
.500 251 183
.600 268 196
CC503 112 lsa 224/230 .553 .561 using 1.65 ratio RR
heads p&p flow #'s
.100 64 57
.200 136 112
.300 180 148
.400 219 169
.500 251 183
.600 268 196
#6
Originally Posted by Black97
These numbers after heads bolted on? I mean after %10-15CFM loss?
BTW thanks guys for the estimates didnt see to many cars with the same set up just wanted a Ballpark figure kinda anxious will be next wednesday when i take it to get dynoed