Dynamometer Results & Comparisons - New Numbers on cam+bolt ons
02-09-2006, 08:32 AM
I put down 423rwhp and 381rwtq at J&J perfromance in Fort Myers Florida. My old numbers are in my sig. same eveything just some tuning by Jeremy from RevXtreme in the tampa area. the car even drives better than before. the old dyno was on a mustang dyno and this one was on a dynojet. Car feels much crisper on the throttle as well.
02-09-2006, 10:05 AM
what were the baseline numbers on the dynojet before the tuning?
02-09-2006, 10:54 AM
Really Impressive #'s man :cool:
02-09-2006, 11:00 AM
Good numbers man. Congrats
02-09-2006, 11:06 AM
baseline on the dynojet were 410rwhp and 348rwtq. best mod so far. stock heads and throttle body.
02-09-2006, 03:01 PM
what else did you do with the cam? Any other bolt-ons? Thats a hell of an improvement for a cam only increase!!
02-09-2006, 03:05 PM
cam only plus bolt ons. the numbers in my sig are with bolt ons then with cam and bolt ons. I am very pleased with the numbers as well. I didn't expect these #'s.
02-09-2006, 03:30 PM
so you gained 81 with only a cam!!!!!!!! NICE! That is very close to FM13 cam specs is it not?
We just did a FM13 in our SS. Before cam made 346/355, so we will see what it does since I've fixed some issues with it
02-09-2006, 03:52 PM
Just noticed this: First dyno was on a Mustang and cam dyno was on a Dynojet.
02-09-2006, 05:02 PM
Nice Numbers but I would be more impressed and had a better comparison if they doth were from the same dyno.
02-09-2006, 06:17 PM
the 342/356 were on a dynojet. my old dynotune with this cam put down 386/366 on a mustang dyno. So I still picked up a few ponies from tuning, and also drivability.
Sorry on the confusion I changed my sig as I got new numbers, and forgot to mention that.
02-10-2006, 01:43 AM
have any pics of the dyno sheet? jsut wondering what the non-peak numbers look like
02-10-2006, 08:04 AM
I don't have a scanner to get it up, but the curve is nice and smooth. A/F is right about 13.0
Non peak numbers are very strong. let me know what you are looking for and i can explain. I am also looking for asomeone local that can get the dyno sheet on the web.
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO