Dynamometer Results & Comparisons - Anyone have solid rwhp gains by switching to just 1 7/8 headers with there setup?




speedo
02-13-2006, 01:47 AM
Searched and Seached came up with some people who have done it but nothing showing a clear gain...well at least with the posts I found in my searches nobody posted back up.

Looking for more stock cube H/C bolt-on setups that switched from 1 3/4 headers to 1 7/8's, but whatever info you have would be welcomed.....

Thanks for your time :)


Slowhawk
02-13-2006, 11:29 AM
FLP Headers switched to Kook stepped netted us 20hp/25tq across the range on a 440rwhp car. Gained 3 tenths and 3mph consistant.

BAIN
02-13-2006, 11:39 AM
FLP Headers switched to Kook stepped netted us 20hp/25tq across the range on a 440rwhp car. Gained 3 tenths and 3mph consistant.

What did the rest of the exhaust consist of? Was it the same from the 1 3/4 to the stepped?


lt1dave
02-13-2006, 05:28 PM
I gained about 10-15rwhp and tq going from pacesetters to Kooks 1 7/8s. (See post in this section). Went from 489 to 508rwhp=19 gain, but the 508rw had a shortbelt, so deduct about 4=15~