how much hp should I expect?
02-16-2006, 04:56 PM
#1
Teching In
Thread Starter
Join Date: Feb 2006
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
how much hp should I expect? I have a M6 '01 
SS it only has a soon-to-be-replaced exhaust, and chip. I want to get a streetable cam, long tubes, custom piping, and no cats.
I haven't dyno'd it yet so when I do get it should i expect a large gain. What should i expect in the track timeslips with street tires and alright driver.
SS it only has a soon-to-be-replaced exhaust, and chip. I want to get a streetable cam, long tubes, custom piping, and no cats.I haven't dyno'd it yet so when I do get it should i expect a large gain. What should i expect in the track timeslips with street tires and alright driver.
this is
02-16-2006, 05:00 PM
#3
You haven't supplied anywhere near close to enough information. Also, this kind of thread is discouraged here, and will probably be locked/deleted.
I'd say anywhere between 345rwhp-410rwhp
I'd say anywhere between 345rwhp-410rwhp
02-16-2006, 05:06 PM
#5
TECH Addict
iTrader: (35)
Join Date: Dec 2005
Location: Cherry Hill, NJ
Posts: 2,373
Likes: 0
Received 0 Likes
on
0 Posts
Stock- you should put down 300 to 325 Cam only w/full bolt-ons= 380-440 depending on what size cam and types of bolt-ons. Stock times with street tires could be anywhere from 12.8-13.5(105-109mph) depending on track conditions, temp., how sticky your tires are, how well you can launch and shift your car. cam only cars with slicks and rear with 440rwhp can go high 10s at around 122 and with380rwhp you should be in the 11s trapping about 116-118mph.
Trending Topics
02-16-2006, 05:14 PM
#8
Teching In
Thread Starter
Join Date: Feb 2006
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
this track in Perris is only 1/8 mile and condition so far have alright but not perfect. I use Falken 615 for tires. and i have taken SRT-4 and mustangs off the line, yet i spin a lot so i still need some work on that.
02-17-2006, 12:55 AM
#9
Board Certified Idiot
Join Date: Oct 2005
Location: EHT ..New JERSEY
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NightRider01
I have a M6 '01 SS it only has a soon-to-be-replaced exhaust, and chip. I want to get a streetable cam, long tubes, custom piping, and no cats.
I haven't dyno'd it yet so when I do get it should i expect a large gain. What should i expect in the track timeslips with street tires and alright driver.
SS it only has a soon-to-be-replaced exhaust, and chip. I want to get a streetable cam, long tubes, custom piping, and no cats.I haven't dyno'd it yet so when I do get it should i expect a large gain. What should i expect in the track timeslips with street tires and alright driver.
assuming all them mods done & a cam along with Tune and you able to drive the car you could expect to run around Mid 11's
02-17-2006, 01:16 PM
#11
TECH Enthusiast
iTrader: (4)
Join Date: Dec 2004
Location: Raleigh, nc
Posts: 663
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by v8hunter
cat back exhaust = about 10 hp
chip = little to no gain (don't waste your money)
read the stickies at the top of the page for more info.
chip = little to no gain (don't waste your money)
read the stickies at the top of the page for more info.
