Going from 3.73s to 4.10s
03-03-2006, 01:35 PM
#1
12 Second Club
Thread Starter
iTrader: (19)
Join Date: Mar 2005
Location: acton, california
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Going from 3.73s to 4.10s What kind of gains would i see going from 3.73s to 4.10s. Freeway driving isnt a big deal as we dont drive the car but 50 miles a month. Right now with the 3.73s the car has went with the fuddle 3500 and all mods in the sig 1.63 60' and 12.2@112 at +5000DA. I just added the crane 1.8 Rockers and with 4.10s what could i expect at the 60' and overall quarter mile. i want to get to the 11s at our track with the bad DA.
03-03-2006, 07:19 PM
#2
Banned
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't on an auto car. The 1st gear ratio is best using a 3.73 pinion, 4.10's will yeild small gains especially if you have a convertor too.
I'd not waste the money on those gears, I'd sell the rockers and spend $200 on a used cam in the sale section and $169 on a set of Comp 918 vsprings, with $100 going to hardened pushrods. If you can do the install yourself great or pay somebody $400 to do it.
You'll have 30+ hp with a cam and THAT is something you'll feel. Forget the gears with your set-up. -Joshua
I'd not waste the money on those gears, I'd sell the rockers and spend $200 on a used cam in the sale section and $169 on a set of Comp 918 vsprings, with $100 going to hardened pushrods. If you can do the install yourself great or pay somebody $400 to do it.
You'll have 30+ hp with a cam and THAT is something you'll feel. Forget the gears with your set-up. -Joshua
