lloyd elliott
03-09-2006, 04:17 PM
#1
lloyd elliott ok iv decided that im going to get my heads done by lloyd elliott as soon as the money will let me. i was wondering out of all u guys that got your heads done by him could tell me some things like,what package did u get, how many cfm's did your heads flow, how much HP gains u got from them, and one of the most important questions, were u happy with them when u got them back and were they as good as u expected. thanks in advance.
and please for all of u guys that want to tell me to go some where else and who u think is better, DONT, this is for lloyd elliot comments and outcomes only. THANKS
and please for all of u guys that want to tell me to go some where else and who u think is better, DONT, this is for lloyd elliot comments and outcomes only. THANKS
03-09-2006, 04:45 PM
#2
TECH Enthusiast
iTrader: (6)
Join Date: Nov 2005
Location: Michigan
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
I have heard NOTHING bad about this guy, i hear his work is exellent and it can't be beat......i have a link her somewhere..........http://68lt1camaro.proboards44.com/i...4901784&page=1
Theres the link of some pictures of his work and some flow #'s at the bottom. I want some too. Best bet is to just get an extra pair of heads from somewhere and send them in. It might take a while, i hear he is a busy guy!
Good luck!
Theres the link of some pictures of his work and some flow #'s at the bottom. I want some too. Best bet is to just get an extra pair of heads from somewhere and send them in. It might take a while, i hear he is a busy guy!
Good luck!
03-09-2006, 04:49 PM
#3
TECH Fanatic
iTrader: (22)
Join Date: Dec 2004
Location: Fishers, IN
Posts: 1,232
Likes: 0
Received 0 Likes
on
0 Posts
I also havent heard a single bad thing about him. If i had an lt1 i would go to him for sure. For tech specs i would just email him or go to his site. http://www.eportworks.com/
As soon as i have the funds i would like to have my trickflows ported. I say do it.
As soon as i have the funds i would like to have my trickflows ported. I say do it.
03-09-2006, 04:52 PM
#4
TECH Enthusiast
iTrader: (11)
Join Date: Nov 2004
Location: columbus GA
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
I sent mine to lloyd and it took about 6 wks I had him port my intake too. I'm doing a LE2 H/C in a speed inc. 383. I'm in the miliatry so I haven't seen the heads yet. I did alot of research on this and everyone said he can't be beat. Call him and talk to him, he's the coolest guy and knows his stuff.
03-09-2006, 04:55 PM
#5
yeah i have heard nothing but good things about him also, right now my car has a blown head gasket and it needs some work on a couple of other things so it doesnt realy matter to me cause im not driving my car right now, i have another car that iv been driving since that has been under. but other wise my mechanic has a crap load of LT1 heads laying around in his shop and he said that i could take some from him if i want to.
03-09-2006, 04:56 PM
#6
Originally Posted by sheikss
I sent mine to lloyd and it took about 6 wks I had him port my intake too. I'm doing a LE2 H/C in a speed inc. 383. I'm in the miliatry so I haven't seen the heads yet. I did alot of research on this and everyone said he can't be beat. Call him and talk to him, he's the coolest guy and knows his stuff.
03-09-2006, 05:06 PM
#7
TECH Enthusiast
iTrader: (6)
Join Date: Nov 2005
Location: Michigan
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ls1charged
right now my car has a blown head gasket and it needs some work on a couple of other things so it doesnt realy matter to me cause im not driving my car right now, i have another car that iv been driving since that has been under. but other wise my mechanic has a crap load of LT1 heads laying around in his shop and he said that i could take some from him if i want to.
Trending Topics
03-09-2006, 05:55 PM
#8
yeah, i think im going to do a 355 rebuild and cam it then get the heads done by lloyd.
ill prolli end up seeing my mechanic tomorrow cause hes working on my friends TA, and ill ask him how much he would be willing to let a set go for. how much are u willing to spend?
ill prolli end up seeing my mechanic tomorrow cause hes working on my friends TA, and ill ask him how much he would be willing to let a set go for. how much are u willing to spend?
03-09-2006, 07:04 PM
#10
TECH Enthusiast
iTrader: (6)
Join Date: Nov 2005
Location: Michigan
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ls1charged
yeah, i think im going to do a 355 rebuild and cam it then get the heads done by lloyd.
ill prolli end up seeing my mechanic tomorrow cause hes working on my friends TA, and ill ask him how much he would be willing to let a set go for. how much are u willing to spend?
ill prolli end up seeing my mechanic tomorrow cause hes working on my friends TA, and ill ask him how much he would be willing to let a set go for. how much are u willing to spend?
03-09-2006, 07:59 PM
#11
Launching!
Join Date: Nov 2005
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
I sent him bare casting trick flows and he done a wonderful job porting them. 2.08, 1.625 valves. With a LE/Bauer Cam for my 398 LT4 stroker. I'll let yall know some dyno numbers here in about a month to show ya how good his work is.
Thanx Loyd Elliott and Bret Bauer.
Thanx Loyd Elliott and Bret Bauer.
03-09-2006, 08:43 PM
#13
Originally Posted by BlackBirdWs6Zzz
Where are you located. I wouldn't mind coughing off 100 bucks or so if they are just laying around. Once i get them, they are going off to get ported. Hopefully by LE but we'll so how the financial situation is. How much is it usually to get heads ported by him??
thanks all of u for posting up good remarks for lloyd elliott it definatly makes me want to go to him more and more, but can u guys post up some HP gains and flow numbers if u have them. thanks
03-09-2006, 08:48 PM
#14
TECH Enthusiast
iTrader: (6)
Join Date: Nov 2005
Location: Michigan
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ls1charged
im in florida. the heads that he has are fully assembled, and they are in really good shape.
03-10-2006, 10:04 AM
#15
TECH Enthusiast
iTrader: (11)
Join Date: Nov 2004
Location: columbus GA
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
My heads, cam, and intake were 1600.00 or so including shipping if I remember correctly. Less than 1800.00 I know. Like I said earlier call him and tell him what you want and he can give you all the info you need. Llyod has a insane amount of knowledge and will answer any questions you might have. I called him a couple of times with questions and he did more than answer them. He's awesome. 2fast97z do you have any numbers yet?
03-10-2006, 10:39 AM
#17
12 Second Club
iTrader: (7)
Join Date: Jul 2005
Location: Chicago burbs
Posts: 955
Likes: 0
Received 0 Likes
on
0 Posts
I've been sending emails back and forth with Lloyd, and he is very helpful with my limited knowledge. Pretty soon Ill be pulling off the heads, and sending them in.
I have not heard a single bad thing against Lloyd. Everyone that I have heard has been more than pleased with the results.
All you guys with LE packages should post up some vids of your cars.
I have not heard a single bad thing against Lloyd. Everyone that I have heard has been more than pleased with the results.
All you guys with LE packages should post up some vids of your cars.
