Run my motor on the Engine Dyno
03-10-2006, 09:14 PM
#1
Teching In
Thread Starter
Join Date: Feb 2004
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Run my motor on the Engine Dyno I ran my motor on the engine dyno today and it made
562Hp 521Tq on motor
770Hp 750Tq on Spray
What should it put to the wheels trough a 12 bolt and a Th-350
562Hp 521Tq on motor
770Hp 750Tq on Spray
What should it put to the wheels trough a 12 bolt and a Th-350
03-11-2006, 12:20 AM
#2
9 Second Club
iTrader: (4)
Join Date: Dec 2004
Location: Cali
Posts: 2,607
Likes: 0
Received 0 Likes
on
0 Posts
You're probably gonna lose about 22-24 percent depending on your converter but 22 at least.... I made 525 RWHP on bottle with a fully built 355 with a 150 shot.... TH400 with a 9" which is like a 25% loss with a 4000 stall converter.....
So that worked out to like 680 hp at the flywheel... which was about right....
And can i hear more about your setup???? Those are good numbers... I'm building a 383 right now to break the 1000hp mark.... We're looking to make about 650hp NA and running 2 stages of nitrous (300 shot 1 stage/100 extra on 2nd kit)....
So that worked out to like 680 hp at the flywheel... which was about right....
And can i hear more about your setup???? Those are good numbers... I'm building a 383 right now to break the 1000hp mark.... We're looking to make about 650hp NA and running 2 stages of nitrous (300 shot 1 stage/100 extra on 2nd kit)....