Shifter in stock t56 console...
#5
TECH Fanatic
iTrader: (4)
Join Date: Jan 2004
Location: Manhattan, KS
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
I took this picture yesterday after I got in from a rainy test drive, so don't mind the water on the floor mat. And yes, I cleaned the car today, it's not dirty like it is in this picture
The shifter is a B&M Pro Ratchet, the tranny is a reverse manual. The **** is a B&M T-Handle with a button on the left side. Here's a picture of the shifter that's under the boot
The boot is actually from a 1998, since I gave away my old one. The shifter/stick/**** all fit very well, and most everyone who doesn't know, thinks it's still a 6 speed. Good for suprising people
Hope this helps your decision
The shifter is a B&M Pro Ratchet, the tranny is a reverse manual. The **** is a B&M T-Handle with a button on the left side. Here's a picture of the shifter that's under the boot
The boot is actually from a 1998, since I gave away my old one. The shifter/stick/**** all fit very well, and most everyone who doesn't know, thinks it's still a 6 speed. Good for suprising people
Hope this helps your decision
#7
TECH Fanatic
iTrader: (4)
Join Date: Jan 2004
Location: Manhattan, KS
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, the red lever/chrome stick up front is the reverse lockout. However, I don't use it on mine, since I never go into the actual "reverse" on my tranny - neutral + tranny brake goes in reverse on mine. But it's there if you need it