texasheat

With my current mods and dyno numbers in sig will I be able to reach 400rwhp with the TSP228R cam on 112lsa? Will it happen?

black01_WS6

iTrader: (13)

you should be pretty close, I went with a bigger cam and picked up 81rwhp.

ninobrn99

iTrader: (8)

expect more like -375-385 hp. I thought that cam would do 400 too, but everyone except for about 2 people have put down numbers in the ranger i listed.

TXZ28LS1

iTrader: (5)

you should be close. i know there are a few that hit 390 with a 224 cam on stock heads, so i would figure if the tuner is really good, you should be close. get it installed and let us know how it does.

vodas00ss

iTrader: (14)

my buddy put the 228r in his 02 z put down 411 402 cam only, and a tsp tune.

deadmanTA

iTrader: (7)

Damn just ordered mine thursday. I'm hoping for at least 390-400 with my ls1 intake, but i guess time will see. I think alot of it is in the tuner also.

texasheat

TSP says it should yield 40-45 rwhp, and I have 350 now so I better get at least 390 or I will be dissapointed. It's already here just have to throw it in and I will post up. Anyone have a dyno graph of this cam???

BriancWS6

iTrader: (18)

Can't wait for the results! Does this cam come standard with any advance ground in? +2, etc? Good luck and don't forget the graph!

Cstick

I made 388 before my ported TB and cut out. Its a good cam.

4mula

dyno numbers dont mean ****.
track numbers count the most.

s346k

iTrader: (4)

this is very true.

however, it usually takes a stick car more rwhp to compete with a stalled automatic at the track.

i'll be sub 12.5 with ~300 rwhp i LOVE big stalled autos!!

4mula

its funny you say that about stick cars needing more power.
i go racing with some locals who are M6 owners that make more power than me and still cant beat me, lol.

99zman

iTrader: (23)

did you install the cam yet?

Ksett

I think you will see 380-385 rwhp.

slow trap

iTrader: (22)

they are 112 +2. mine made 383 rwhp through the hooker catback and no ud pulley so with all the mods,ls6 intake included,390 should be no problem. also some dynos are more stengy than others, i ran 92-94 mph in the 1/8th.

00SS4780

iTrader: (3)

I saw 419/398, but that was with PP heads. I never had it cam only. The cam is great and pulls awsome. It's a great cam to DD in and then go to the track with it. My car also has a LS6 intake and most bolt-on's. 6 speed also. I guess that also means about 40hp from the heads too by goin on what other's have posted on with cam only.

lilbuddy1587

iTrader: (1)

With your power and your track times, you're not very impressive.