ws6nick

iTrader: (1)

150 shot...Never done it before, just wanna know what speed I should hit it at to make sure I dont end up sidways on the track with street tires, no suspension mods.

99FormulaM6

iTrader: (21)

hey, im going to be spraying a 150 shot this week too

TN94Z

iTrader: (14)

I was hitting my 150 shot at about 2800-3000rpm...not sure on the speed. But it was pretty much coming in about the time I was getting to the tree. Then again I had drag radials, so not sure on street tires. I would probably at least wait until you hit second gear to keep from really breaking loose. The 150s are a whole different animal. You're gonna love it

ws6nick

iTrader: (1)

Sweet... I figured way later on down the track...like after 60mph.

Y2kforgedSS

Do it out of the hole you will like it! Nah if your wanting to be safe and let it hit as soon as you get into second gear.

sleeperstyle

iTrader: (4)

150 hit here too- in the next couple weeks. i only need 1 fitting and to finish up some misc. wiring i have to find time/motivation to finish it before the weather breaks.

onephatZ28

iTrader: (8)

I alway hit it at 3,000 RPM on the street,and at the track I would hit it as the car was passing the tree.

TN94Z

iTrader: (14)

On my new car I will be spraying 150 or so out of the hole on a transbrake. That is going to be fun.

AdReNoLiNjUnKiE

2ND gear is good, first gear too much tire spin!!!

227Hawk

iTrader: (1)

I'm not sure this thread is going to turn good results.
Hawk