Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

3 Channel and 4 Channel

Thread Tools
 
Search this Thread
 
Old 04-03-2006, 02:45 PM
  #1  
On The Tree
Thread Starter
iTrader: (16)
 
98WhiteDevil's Avatar
 
Join Date: May 2005
Location: Farmington Hills, MI
Posts: 117
Likes: 0
Received 0 Likes on 0 Posts
Default 3 Channel and 4 Channel

I have a 98 Trans Am with TCS, so I have a 4 channel rear end. I've removed all the TCS stuff in the engine compartment so the TCS no longer works.

My dad has a 02 SS without TCS, so he has a 3 channel rear end. I want to put his 3 channel rear end in my car. Is it possible to do this, if so, what do I need to do?
Old 04-04-2006, 06:02 AM
  #2  
Banned
iTrader: (5)
 
Gregg_98TA's Avatar
 
Join Date: Feb 2004
Location: https://t.me/pump_upp
Posts: 178
Likes: 0
Received 0 Likes on 0 Posts

Default

You will need a ABS only brake hydraulic unit (and attached ecu).
Re-route one rear wheel speed sensor wire to use for the center wheel speed sensor.
I think that is basically all you need other than bleeding the brakes and such.




All times are GMT -5. The time now is 04:20 PM.