ZEX TPS sensor connection on Corvette...help!
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
ZEX TPS sensor connection on Corvette...help!
Hey guys, I'm in the final stages of finishing my Zex install on my ZO6(drive by wire)and have run into a jam on the TPS wire connection. Which one is it?
I am running an LS2 TB and according to the C6 guys, the green wire is the one to use, but that one does not work.....
I am now thinking that I'll have to bypass the LS2 harness and tap into the original tb wiring harness, just unable to find the correct wire...
Any help is appreciated.
Alan
I am running an LS2 TB and according to the C6 guys, the green wire is the one to use, but that one does not work.....
I am now thinking that I'll have to bypass the LS2 harness and tap into the original tb wiring harness, just unable to find the correct wire...
Any help is appreciated.
Alan
#2
I talked to a zex tech guy bout my 05 gto m6 who said that one wire was rising signal and other is falling signal so he said either one should work. I have had mine on the purple wire and the nmu greeen light comes on so thats cool. I've had the kit since april and haven't ran it on n20 yet--and i did hear of someone else who had problems (05GTO)with the purple and went green. I gotta get some a/f ratios b-4 i do anything much--pretty much got the rear mods needed for 125 shot from zex system.